Skip To Content

NRS™ Regelventile

Low Flow Gas & Liquid Flow Control Valves
Verfügbare Modelle 8503F / 8504F

The Brooks® NRS™ (non-rising stem) control valves are designed specifically for extremely low flow gas and liquid applications. Straight and 90° angle pattern models in stainless steel are available. They feature a means of adjusting a sliding tapered needle which prevents sticking due to foreign matter in the fluid. These valves are particularly suitable for precise control requirements and possess a high turns to lift ratio. The flow is constant for any given stem position.

Six needles with different tapers provide a wide choice of flow ranges. Needles and orifices can be changed without removing the valve body from the line (two different orifices are used, one for needle sizes 1-3, another for sizes 4-6).

Haben Sie Fragen?

Sprechen Sie mit einem unserer Anwendungsexperten, wir helfen Ihnen gerne:

Rufen Sie an unter: +49 351 215 2040

Für Preisinformationen:

Ein Angebot anfordern
Component datasource missing. Select a datasource for this component.


  • Smooth non-reversing flow characteristics
  • Constant flow at any given stem position
  • Fifteen turns full open to full close provides high turn to lift ratio for excellent resolution
  • Six interchangeable needle tapers, each increases capacity by an approximate factor of three
  • O-ring seal cannot be damaged by overtightening
  • Panel mounting nuts included - standard
  • 1/8" NPT connections integrally machined into body

For Use With

  • Mass Flow Meters
  • Variable Area Flow Meters

Designed for Extremely Low Flow Applications

Straight and 90° Angle Pattern Models Available

Wide Choice of Flow Ranges

Durchflussbereich (Maximalwert)
See Capacities & Pressure Drops Table in Data Sheet
Maximaler Druck
Stainless Steel Model: 1000 psig
Maximale Temperatur
Stainless Steel Model: 250oF (120oC)

Standard: 1/8" female NPT - integral

Optional: 1/8", 1/4" compression fitting; 1/4" female NPT; 1/4" ID hose type adaptors

See Dimensions Figure
Verwendete Materialien

316 Stainless Steel

Size 1-3: Stainless steel and Teflon®;
Sizes 4-6: Stainless Steel

Valve Needle
316 Stainless Steel

Stainless Steel

Viton® fluoroelastomers

8503F 8504F
Konfiguration NRS Angle Pattern NRS In-line Pattern
Dateiname Dateityp Dokumente nach Sprache
Data Sheet pdf English