Skip To Content

Secondary Electronics

PRODUCTS

LR-056 Series
LR-056 Series
0250 Series
0250 Series
0260 Series
0260 Series
Product Type Pressure Transducer Display

Power Supply, Readout & Setpoint Controller

30 Channel Controller, Power Supply for up to 10 MFCs
Differentiator Miniature display for point-of-use pressure monitoring Innovative solution for up to four mass flow and/or pressure devices Turnkey solution for up 30 MFCs
Power Input 4-20 mA (2-wire, loop powered) Voltage: 12-24 Vdc required, -15 Vdc permitted
Current: 400 mA max current draw per channel
Instrument power draw: 0.8 Watts
Optional power module: 100-240 Vac, 47-63 Hz
85-250 Vac, 47-63 Hz
Power Output

Current loop powered (transducer voltage +6 Vdc loop voltage drop)

+15V/2.0A, -15V/1.0A or 12-24 Vdc/2.0A Voltage: 24 Vdc (± 10%)
Current: 3.5 Amp
Will power up to 10 Brooks S-Series, SLA Smart II or 4800 Series mass flow devices
Signal Input / Output

Input: Connector, factory wired for 4-20 mA transducer

Output: Top mount, 6-wire cable

0(1)-5 Volts, 0(2)-10 Volts, 0(4)-20 mA RS485 S-Protocol (HART Command Set)
Digital Communication Full communications capability for remote readout, setpoint, control, programming and data acquisition via RS232. RS485 S-Protocol
Mounting Options Top

Panel mount kit

Table top kit

Rack mount kit (0254 only, can be used to retrofit into 0152/54 installations)

Rack mount kit with 19” rack (0254 only)

Table top
EMC CE Mark EN61326

CE Mark: EMC Directive EN61326-1:2013
FCC Part 15 Class A, Part 68

CE Mark EN61326-1
Environmental Compliance RoHS

RoHS EPD 2011/65/EU

UL-USA & Canada UL 61010 electrical safety for general purpose indoor use
RoHS EPD 2002/95/EC, 01Jul2006